Menu Close

Accessories for Ortur and Aufero 24V lasers

LU2-4-LF Long Focus Laser Module

  • 5.5 Watt Laser power
  • Compressed Spot about 0.17 x 0.25mm
  • 50mm Focal length
  • 4.2 to 5.0 Volt tollerant
  • Comes with Air Cone & Air assist
  • Shading Acrylic shield to protect the eyes
  • Can run a long time due to aluminum housing and active cooling
  • Works on Aufero Laser 1 – Aufero Laser 2 and Ortur Laser Master 2 Pro
  • 1 Year warranty

Buy this laser module directly from the ORTUR official webshop.

The Aufero LU-2-4 LF is the best choice for cutting materials and comes with both an Air Cone (if you don’t have an Air Compressor, and an Air Assist unit that can be used with an Air Compressor (not supplied with the laser).

The laser can also be used for engraving photo’s, yet you should place the laser at 55mm focal distance for a nice engraving.

LU2-4-SF Short Focus Laser Module

  • 5.5 Watt Laser Power
  • Compressed Spot about 0.08 x 0.15mm
  • Fixed Focal Point (use gauge 3mm under Acrylic Shield
  • 4.2 to 5.0 Volt tollerant
  • Shading Acrylic shield to protect the eyes
  • Can run a long time due to Aluminum housing and active cooling
  • Works on Aufero Laser 1 – Aufero Laser 2 and Ortur Master 2 Pro
  • 1 Year warranty

Buy this laser module directly from the Ortur official webshop

The Ortur LU2-4-SF is the best choice if you want to do both, engraving and cutting. This laser has good cutting power (although not as good as the above laser module) and can engrave better than the Long Focus module.

Most of the time, when you buy a laser engraver, this is the module you should look for as your first choice, as this is the most versatile laser.

LU2-2 7 Watt Engraving module

  • About 1.4 Watt Laser Power (real optical output)
  • Compressed Spot about 0.07 x 0.06mm (sharpest of them all)
  • Fixed Focal Point at 30mm from laser base
  • 4.2 to 5.0 Volt tollerant
  • Shading Acrylic Shield to protect the eyes
  • Can run a long time due to Aluminum housing and active cooling
  • Works with Aufero Laser 1 – Aufero Laser 2 and Ortur Laser Master 2 Pro
  • 1 Year Warranty

At the time of making this page, this module could only be bought together with a laser machine. It’s not sold separately.

If your goal is to do the best possible laser engraving of photos and fine details, then this is the laser module you should have.

Except for some paper, this laser is not capable of cutting things, but it is the laser for the best-detailed artwork when it comes to engraving.

This module is only available in combination with the Aufero Laser 1, or the Aufero Laser 2 machines. It can’t be bought separately.

Y Axis Rotary Roller

This Y axis rotary roller is made for engraving on cylindrical objects like cans.

It can be mounted parallel, but also in an offset, so that cone shaped objects can also be engraved.

The Y axis motor on the laser engraver is disabled and will be replaced with the motor on the Y axis roller.

Ortur & Aufero Offline controller

The Offline controller can be used to operate any of the 24 Volt Ortur and Aufero laser machines without the use of a computer.

Simply use GCode that is provided by a website, or generate your own GCode using software like Lightburn to make a file that is written on a Micro SD card, and use the controller to operate the laser engraver without your computer attached.

This also minimizes the chance of failure due to a computer that goes into sleep mode or turns off because of an empty battery.

The offline controller also adds WiFi functionality to your laser engraver.

Z-Height Adjuster

This Z height adjuster, made of Aluminum Alloy is made to easily focus your laser to the object you are engraving or cutting.

With the large knob on top of the Z heigth adjuster, you can move your laser head up- or down to get the perfect focus.

With an allen wrench you can adjust the tightness of the knob rotation so you can find the perfect balance between not moving the laser module due to vibrations, and the force you will need to adjust the height.

This Z Height Adjuster is NOT compatible between Ortur and Aufero machines, so you have to make sure to order the correct Z height adjuster for your machine