Da Vinci Pro43 Videos

Importing GCODE from other slicers in XYZWare for Pro

Because there are problems with XYZWare for Pro, the slicer that comes with a Da Vinci Pro printer, it can be useful to use another slicer and load the GCODE from that other slicer into XYZWare for Pro, so that the Da Vinci Pro printer can use and print it.


Getting the best results out of your 3D printer is something that is pretty difficult. You have to dial in your printer to the very best settings, but how do you know what settings are the best? In this video, I am explaining how to set the extrusion multiplier in your slicing software. The extrusion […]

Removing the clicking sound of the Da Vinci Pro 1.0

Everyone with a Da Vinci Pro printer knows it, the annoying clicking noise that the printer makes when you are printing. The sound that comes from the top left of the printer, and it’s really very annoying. The sound comes from the printer’s extruder, which is clearly completely set incorrectly in the XYZPrinting, XYZWare for […]

Repairing the pneumatic push fitting of the Da Vinci Pro 1.0 and 3-in-1

One of the common failures in the XYZPrinting Da Vinci Pro printer is the breakdown of the pneumatic push fitting used on the printer’s extruder. This push fitting has, as standard, too few teeth to hold the PTFE tube and must therefore be replaced by another model that has enough teeth. In this video I […]