Da Vinci Pro43 Videos

Using PTFE filament on the Da Vinci Pro printer

Printing with PETG filament on the Da Vinci Pro printer is not them easy as it seems. Yet it is easy to do something about it, namely re-setting the characteristics of the filament and look … Perfect prints.

PTFE tube for the Da Vinci Pro filament holder I made

After about 1 year of intensive use, I discovered that the filament holder I made and shared on Thingiverse contains a small mistake. But, luckily not much is going on, you can easily solve this problem. Look.

Unclogging the nozzle of the Da Vinci Pro machine. AGAIN!

Again a video about removing a blockage from the Da Vinci Pro printer, but this time I show it in a different way so that it might be even clearer what to do to clear the blockage.

Improving the quality of your Da Vinci Pro 3D printer

Watch this video if you want to see a whole list of upgrades for your Da Vinci Pro printer. From cooling for PLA filament to a camera on the inside of the printer, here you will find all the tips.

Making a desk lamp with my Da Vinci Pro 1.0 3D printer

Make a very nice desk lamp with a very cheap lamp from the dollar store by designing a lamp yourself. Long live 123dDesign

Unclogging the nozzle of the Da Vinci Pro 1.0 3D printer

Nothing is more annoying than a blockage in the nozzle of your 3D printer, or wait … A blockage in the nozzle of your XYZPrinting Da Vinci Pro printer is even worse. In this video I show how I can easily solve the blockage

Upgrading your Da Vinci Pro printer with a FAN DUCT

If you are going to print with PLA on a Da Vinci Pro printer, you actually need a cooling fin to cool the filament just after printing. For that reason, I made a cooling fin myself that precisely places the cold air where cooling is needed. Watch the video and see how you can make […]

Repairing the pneumatic push fitting of the Da Vinci Pro 1.0 and 3-in-1

One of the common failures in the XYZPrinting Da Vinci Pro printer is the breakdown of the pneumatic push fitting used on the printer’s extruder. This push fitting has, as standard, too few teeth to hold the PTFE tube and must therefore be replaced by another model that has enough teeth. In this video I […]

Removing the clicking sound of the Da Vinci Pro 1.0

Everyone with a Da Vinci Pro printer knows it, the annoying clicking noise that the printer makes when you are printing. The sound that comes from the top left of the printer, and it’s really very annoying. The sound comes from the printer’s extruder, which is clearly completely set incorrectly in the XYZPrinting, XYZWare for […]

Importing GCODE from other slicers in XYZWare for Pro

Because there are problems with XYZWare for Pro, the slicer that comes with a Da Vinci Pro printer, it can be useful to use another slicer and load the GCODE from that other slicer into XYZWare for Pro, so that the Da Vinci Pro printer can use and print it.