Slicer35 Videos

Anet E-10 almost PERFECT profile for Simplify3D

It seems like everyone is tinkering the Anet E-10 at this moment, and everyone should because the out of the box experience of this printer is not that good but the printer can be almost perfect after you do a lot of work. The fun thing is that it costs almost no money, only some […]

How to make support structures that WON’T FAIL

Making support structures can be challenging at sometimes. The reason is that support structures are very minimal pieces of plastic that are being built on your 3D printer bed, but they hardly have a surface of themselves. Now to generate a good support for your overhanging parts in your 3D print, you can use the […]

Importing GCODE from other slicers in XYZWare for Pro

Because there are problems with XYZWare for Pro, the slicer that comes with a Da Vinci Pro printer, it can be useful to use another slicer and load the GCODE from that other slicer into XYZWare for Pro, so that the Da Vinci Pro printer can use and print it.

Anet E-10 3D Printer Final Thoughts after a few weeks of use

Here they are, my final thoughts about the Anet E-10 3D printer that I got for a review from GearBest. I have mixed feelings about this machine. It’s now one of the better machines I own, but only after some intensive tinkering and that is because out of the box, the machine was not good […]

Simplify3D 4.1.0 can now be downloaded

Good news for Simplify3D users, there is a new version of the software that can be downloaded right away

Removing the clicking sound of the Da Vinci Pro 1.0

Everyone with a Da Vinci Pro printer knows it, the annoying clicking noise that the printer makes when you are printing. The sound that comes from the top left of the printer, and it’s really very annoying. The sound comes from the printer’s extruder, which is clearly completely set incorrectly in the XYZPrinting, XYZWare for […]

Making parts STRONGER with slicer settings

With a very simple setting in your slicer you can get much more mechanical strength out of your 3D printed parts. In this video I show you how to do this.

Again a new version of Simplify3D, version 4.1.1

Again Simplify3D had brought us an update for their slicer, with mainly bug fixes but also some improvements in speed and adhesion settings.

Using a temperature tower to determine the best printing temperatures

How do you determine the best temperature for your nozzle during 3D printing? Just make a temperature tower, then you know exactly where you stand.