Slicer35 Videos

Bridging Speed Multiplier in your slicer

3D Printing Questions is a series of video’s I am making to answer the questions I got asked many times in my career as a 3D Print Creator. In this episode, it’s about the bridging speed multiplier that you can find in your slicer like Simplify3D or Cura. The speed multiplier is used to increase […]

DIY bone conducting headset for airsoft gameplay using a 3D printer

In this video I will be making a bone conducting earpiece for airsoft gameplay so I can listen to the things that are happening around me while still being able to hear my two way radio. The parts needed for this project are a simple earpiece for the Baofeng UV-5R radio I use and a […]

3D Printing in SPIRAL VASE mode

Normally when you are printing a model on your 3D printer, the model will have a point where the printer begins and ends at each independent layer. When you are printing in spiral VASE mode however, your printer will be printing in one continues motion all the way until the print is finished. The benefits […]

Geeetech E180 Final Review – New Style

Hi Guys and Girls, This is my first review I do scripted and I am planning to do a lot more of these reviews in this year. How do you like it? It’s all about the Geeetech E180. Althoug, it’s about the printer and NOT the slicer as I don’t think the slicer is very […]

GEEETECH E180 is Working, yet still a PREVIEW

Watch my second attempt with this Geeetech E180 3D printer. I received a new slicer for it and now I can get it to work. The prints that are coming out of this printer really look amazing. The printer prints like many of it’s way more expensive siblings, yet the slicer isn’t perfect.

GEEETECH E180 Preview and it’s complete unusable software

Hi folks, thanks for watching my video’s. The kind people of Gearbest gave me this Geeetech E180 printer to make an honest review about the machine but because I only have it for 4 days now, this is only a preview of that bigger review. For now, I think that based on the quality of […]

No more lifting corners on your 3D printer

In this video I will show you how to get rid of the lifting corners that sometimes appear when you are 3D printing large parts on the bed of your 3D Printer.

Making parts STRONGER with slicer settings

With a very simple setting in your slicer you can get much more mechanical strength out of your 3D printed parts. In this video I show you how to do this.

Anet E-10 3D Printer Final Thoughts after a few weeks of use

Here they are, my final thoughts about the Anet E-10 3D printer that I got for a review from GearBest. I have mixed feelings about this machine. It’s now one of the better machines I own, but only after some intensive tinkering and that is because out of the box, the machine was not good […]

Anet E-10 almost PERFECT profile for Simplify3D

It seems like everyone is tinkering the Anet E-10 at this moment, and everyone should because the out of the box experience of this printer is not that good but the printer can be almost perfect after you do a lot of work. The fun thing is that it costs almost no money, only some […]