I saw this video from Joel Telling on Youtube: https://www.youtube.com/watch?v=nL0nW… And I was thinking to myself… Can I do that… With my cheap Son of a …Da Vinci Pro machine? So I copied the settings Joel used on the same model he used and hit the print button. Guess what? I am pretty proud, although […]
3D Printing Questions is a series of video’s I am making to answer the questions I got asked many times in my career as a 3D Print Creator. In this episode, it’s about the bridging speed multiplier that you can find in your slicer like Simplify3D or Cura. The speed multiplier is used to increase […]
A few people asked my what my settings are for the large bridge, well… Here they are.
On of the important settings in Simplify3D is the setting for the coasting. The determines the opening in the filament that is left after reaching the end of a layer ring. Setting the coast in the correct value gives you great results. Choosing the wrong values gives you very poor print quality. So check this […]
Making support structures can be challenging at sometimes. The reason is that support structures are very minimal pieces of plastic that are being built on your 3D printer bed, but they hardly have a surface of themselves. Now to generate a good support for your overhanging parts in your 3D print, you can use the […]
Dustin the JAT.MN over at his channel showed us how he has problems with his Simplify3D version that isn’t capable to output the same GCODE twice. In fact, there are so many differences between the generated files that it’s not possible that the print comes out the same twice. He asked people to do the […]
Good news for Simplify3D users, there is a new version of the software that can be downloaded right away
It seems like everyone is tinkering the Anet E-10 at this moment, and everyone should because the out of the box experience of this printer is not that good but the printer can be almost perfect after you do a lot of work. The fun thing is that it costs almost no money, only some […]
Again Simplify3D had brought us an update for their slicer, with mainly bug fixes but also some improvements in speed and adhesion settings.