Simplify3D26 Videos

Simplify3D users can solve a problem I had in a previous video

Oops, if you make videos, then sometimes it goes wrong, like this morning when I released THIS video about designing for 3D printing. In that video I pick up a point that is not wrong in itself because you really have to take into account the way you manufacture something, but I use Simplify3D as […]

Simplify3D EXTRUSION MULTIPLIER explained

Getting the best results out of your 3D printer is something that is pretty difficult. You have to dial in your printer to the very best settings, but how do you know what settings are the best? In this video, I am explaining how to set the extrusion multiplier in your slicing software. The extrusion […]

Geeetech E180 Final Review – New Style

Hi Guys and Girls, This is my first review I do scripted and I am planning to do a lot more of these reviews in this year. How do you like it? It’s all about the Geeetech E180. Althoug, it’s about the printer and NOT the slicer as I don’t think the slicer is very […]

Checking the quality of the 3D scanned image, scanned with the Huawei Mate 20 Pro

In this video, we will be looking at the quality of the build-in scanner app on the Huawei Mate 20 Pro, that uses a build-in structured light scanner to scan 3D objects.

3D Printing in SPIRAL VASE mode

Normally when you are printing a model on your 3D printer, the model will have a point where the printer begins and ends at each independent layer. When you are printing in spiral VASE mode however, your printer will be printing in one continues motion all the way until the print is finished. The benefits […]

DIY bone conducting headset for airsoft gameplay using a 3D printer

In this video I will be making a bone conducting earpiece for airsoft gameplay so I can listen to the things that are happening around me while still being able to hear my two way radio. The parts needed for this project are a simple earpiece for the Baofeng UV-5R radio I use and a […]

Making an 18cm long bridge on the Da Vinci Pro 1.0

I saw this video from Joel Telling on Youtube: https://www.youtube.com/watch?v=nL0nW… And I was thinking to myself… Can I do that… With my cheap Son of a …Da Vinci Pro machine? So I copied the settings Joel used on the same model he used and hit the print button. Guess what? I am pretty proud, although […]

Bridging Speed Multiplier in your slicer

3D Printing Questions is a series of video’s I am making to answer the questions I got asked many times in my career as a 3D Print Creator. In this episode, it’s about the bridging speed multiplier that you can find in your slicer like Simplify3D or Cura. The speed multiplier is used to increase […]