On this page you will find the videos about Creality 3D printers that I tested.
Scroll down for older models.
▼ Ender 3 V2 Skipped Steps Problem SOLVED
Best 3D Printer Upgrades: https://3d-printcreator.com/best-3d-printer-upgrades/
Users with an Ender 3 V2 printer who purchased this printer at the end of 2020, or early 2021, and who are experiencing ...skipped steps in virtually every print, may experience an issue on the motherboard of the printer, which has wrong stepper drivers.
Creality has shipped the Ender 3 V2 with the 4.2.2. motherboard, where the stepper drivers are soldered to the board, so they are not easy to replace. In the beginning, these were original Trinamic TMC 2208 silent stepper drivers (and the board is also available with 4988 stepper drivers), but later Creality started using a clone made in China that is much cheaper, but also much worse. These knock-off stepper drivers cause the problem of skipped steps, and this has nothing to do with incorrectly assembling the printer or not tightening the belts properly.
Since the TMC 2208 stepper drivers are soldered to the board and are not easy to replace, the only solution to fix the problem is to replace the motherboard with the 4.2.7 version, which is sold as an upgrade by Creality.
At the time of making this video, buyers who bought this printer with the wrong stepper drivers are not yet being compensated for this issue, and these users can only go to their reseller. In my case, the Dutch seller where my printer comes from was kind enough to give me the 4.2.7. motherboard for free to repair the printer, but I read on various forums that this is not the case everywhere in the world.
I can confirm that after replacing the 4.2.2 motherboard to the 4.2.7 motherboard, all problems have been resolved.
▼ If you want to buy me a nice cold drink, please do so:
http://support.3d-printcreator.com
▼ Subscribe to me on YouTube:
http://subscribe.3d-printcreator.com
▼ Find me on Thingiverse:
http://thingiverse.3d-printcreator.com
▼ Follow me on Twitter:
http://twitter.3d-printcreator.com
▼ Or on my website:
https://3d-printcreator.com/
Have any questions for me? Feel free to ask them here or on my other social media accounts.
Keywords for this video:
#Ender3v2 #3DPrintCreator #Creality #422motherboard
Thanks for watching this video.[+] Show More
▼ Creality Ender 2 Review
▼Creality CR-10mini
GearBest: https://goo.gl/C2Zg3f
Banggood: https://goo.gl/3SBKbU
▼AnyCubic I3 Mega
GearBest: https://goo.gl/WMSys6
Banggood: https://goo.gl/abwsjz
DealExtreme: https://goo.gl/qji2gw
▼JGAurora A5
GearBest: https://goo.gl/QTRDN5
Banggood: https://goo.gl/Ju3XXe
DealExtreme: https://goo.gl/prPyRG
▼Creality Ender 2
GearBest: https://goo.gl/yqinf8
Banggood: https://goo.gl/7MPSpv
▼Geeetech E180 Mini
GearBest: https://goo.gl/jQkWhm
DealExtreme: https://goo.gl/qMB3yd
▼4x Super Silent MKS V1.3 TMC2100 Stepper Drivers
GearBest: https://goo.gl/NcMwof
▼ ...If you want to buy me a nice cold drink, please do so:
http://support.3d-printcreator.com
▼ Or you can support me on a monthly basis by becoming a PATRON, That really helps me making the best of this channel:
https://www.patreon.com/3Dprintcreator
See all contact details in the info below:
▼ Subscribe to me on YouTube:
http://subscribe.3d-printcreator.com
▼ Find me on Thingiverse:
http://thingiverse.3d-printcreator.com
▼ Follow me on Twitter:
http://twitter.3d-printcreator.com
▼ Or on my website:
http://3d-printcreator.com/
▼ Want to sent in items to review?
See my adres details on http://3d-printcreator.com/contact/
Have any questions for me? Feel free to ask them here or on my other social media accounts.
Thanks for watching this video.[+] Show More

▼ Creality Ender 2 Review
Affiliate links: ▼Creality CR-10mini GearBest: https://goo.gl/C2Zg3f ...

▼ 10 ways to Turbocharge your OLD 3D Printer
In this video I show you 10 ways how to get high speed printing done ...

▼ The Ender 2 printing NGEN FLEX material
This is just a little channel update. I am now printing NGEN FLEX ...

▼ Putting together the ENDER 2 printer
From the money I earned with the affiliate links and donations from ...
▼ Review Creality CR-10Mini after 10 months of use
Everything I say in this video is my honest opinion. I have received this printer from GearBest.com for a review 10 months ago but they have changed their policy about reviewing stuff and they now want me to make a video about every promotion they have, therefore I temporarily stopped working with them. There is NO affiliate link in this description for this printer.
▼ If you want to buy me a nice cold drink, please do so:
http://support.3d-printcreator.com
▼ Or you can support me on a monthly basis by becoming a PATRON, That really helps me make the best of this channel:
https://www.patreon.com/3Dprintcreator
See all contact details in the info below:
▼ Subscribe to me on YouTube:
http://subscribe.3d-printcreator.com
▼ Find me on Thingiverse:
http://thingiverse.3d-printcreator.com
▼ Follow me on Twitter:
http://twitter.3d-printcreator.com
▼ Or on my website:
http://3d-printcreator.com/
▼ Want to send in items to review?
Please contact me at info@3D-printcreator.com
Have any questions for me? Feel free to ask them here or on my other social media accounts.
Keywords for this video:
#Creality3D #CR10Mini #3DPrintCreator
Thanks for watching this video.[+] Show More

▼ Review Creality CR-10Mini after 10 months of use
This video is my final review of the Creality CR-10Mini printer that ...

▼ Mini review of the Creality CR-10 Mini
After 3 days of using it, these are my first thoughts about the ...

▼ 10 ways to Turbocharge your OLD 3D Printer
In this video I show you 10 ways how to get high speed printing done ...