On this page you will find the videos I made about the TwoTrees laser engravers I tested.
Scroll down for older models.
▼ TwoTrees TS2 Laser Engraver Review
Buy the TwoTrees TS-2 here on TwoTrees3dOfficial: https://gozbx.com/r/FkciObY0ffnP
Coupon code: GCW6CSGN9XE9 (Buy one get three)
Coupon code: TS2 (With $30 off)
Or here on Banggood: https://gozbx.com/r/He85ydXQLxUz
Coupon code: BG64e22d (Get $30 off)
The TwoTrees laser ...engraving machine and cutter is definitely one of the most complete laser cutting machines you can buy right now that uses a 10 Watt diode laser.
The machine can be operated perfectly with the free LaserGRBL software, but you can also work perfectly with Lightburn with this machine, and TwoTrees has its own app for Android and Apple users with which you can use the machine over WiFi.
You no longer have to do the adjustment of the machine by hand, because the TS-2 uses a very well-functioning autofocus over the Z axis of the machine, and this autofocus measures with a probe where the material is located. You just have to indicate whether you want to engrave or cut, and if you want to cut, you have to tell us how thick the material is that you want to cut. The TS-2 then sets itself to the correct depth, making the most perfect cuts I've ever seen from a laser cutting machine with a diode laser.
As an example, I have never managed to make a nice cut from 6mm thick MDF board, but with this machine it was no problem at all. Acrylic and stainless steel are also no challenge for this machine, you can simply work with these materials.
TwoTrees gave me this machine as a gift for a review, but they were unable to influence the review in any way. Everything I say and show in this review is my own opinion and came about through my own testing.
▼ If you want to buy me a nice cold drink, please do so:
http://support.3d-printcreator.com
▼ Subscribe to me on YouTube:
http://subscribe.3d-printcreator.com
▼ Find me on Thingiverse:
http://thingiverse.3d-printcreator.com
▼ Follow me on Twitter:
http://twitter.3d-printcreator.com
▼ Or on my website:
https://3d-printcreator.com/
Have any questions for me? Feel free to ask them here or on my other social media accounts.
Keywords for this video:
#3Dprinter #3Dprinting #XYZPrinting #3Dprintcreator
Thanks for watching this video.[+] Show More
▼ TwoTrees TS2 Laser Engraver Review
Buy the TwoTrees TS-2 here on TwoTrees3dOfficial: ...
Buy the TwoTrees TS-2 here on TwoTrees3dOfficial: https://gozbx.com/r/FkciObY0ffnP
Coupon code: GCW6CSGN9XE9 (Buy one get three)
Coupon code: TS2 (With $30 off)
Or here on Banggood: https://gozbx.com/r/He85ydXQLxUz
Coupon code: BG64e22d (Get $30 off)
The TwoTrees laser ...engraving machine and cutter is definitely one of the most complete laser cutting machines you can buy right now that uses a 10 Watt diode laser.
The machine can be operated perfectly with the free LaserGRBL software, but you can also work perfectly with Lightburn with this machine, and TwoTrees has its own app for Android and Apple users with which you can use the machine over WiFi.
You no longer have to do the adjustment of the machine by hand, because the TS-2 uses a very well-functioning autofocus over the Z axis of the machine, and this autofocus measures with a probe where the material is located. You just have to indicate whether you want to engrave or cut, and if you want to cut, you have to tell us how thick the material is that you want to cut. The TS-2 then sets itself to the correct depth, making the most perfect cuts I've ever seen from a laser cutting machine with a diode laser.
As an example, I have never managed to make a nice cut from 6mm thick MDF board, but with this machine it was no problem at all. Acrylic and stainless steel are also no challenge for this machine, you can simply work with these materials.
TwoTrees gave me this machine as a gift for a review, but they were unable to influence the review in any way. Everything I say and show in this review is my own opinion and came about through my own testing.
▼ If you want to buy me a nice cold drink, please do so:
http://support.3d-printcreator.com
▼ Subscribe to me on YouTube:
http://subscribe.3d-printcreator.com
▼ Find me on Thingiverse:
http://thingiverse.3d-printcreator.com
▼ Follow me on Twitter:
http://twitter.3d-printcreator.com
▼ Or on my website:
https://3d-printcreator.com/
Have any questions for me? Feel free to ask them here or on my other social media accounts.
Keywords for this video:
#3Dprinter #3Dprinting #XYZPrinting #3Dprintcreator
Thanks for watching this video.[+] Show More
▼ TwoTrees TR2 Pro Rotary Roller
The product shown is the TwoTrees TR2 Pro Rotary Roller Affiliate ...
The product shown is the TwoTrees TR2 Pro Rotary Roller
Affiliate link: https://gozbx.com/r/pxgpjHgt00wz Thanks for using this link, it helps the channel
Or... Win a TwoTrees Product here: https://gleam.io/5nIgC/christmas-wish-list
The TwoTrees TR2 Rotary ...Roller is not only a roller for engraving round objects, like mugs or flasks, but it has all the tools for you to also engrave on rings, balls, long objects like pipes or bottles, objects that are not round, and not useable on normal rotary rollers, etc.
This Rotary Roller is by far the most versatile tool I have ever seen for my laser engraver, and you can use it not only on TwoTrees lasers, but also on any other laser engraver that uses a stepper motor for the Y axis (as far as I know, all of them). The needed cables for the different types and brands of lasers are included in the box.
- The TwoTrees Y axis Rotary Roller, for ANY laser engraver: https://gozbx.com/r/pxgpjHgt00wz
- The TS2 Laser engraver I used: https://s.zbanx.com/r/FkciObY0ffnP
- Air Assist unit for ANY TwoTrees Laser (and many other brands) https://s.zbanx.com/r/gsmzZCGIodjL
00:00 Introduction
00:16 TR2 PRO a very special rotary roller
00:34 Chuck for engraving balls and much more
00:51 Engrave jewelry, like rings
01:08 Replacable claws in the Chuck are included
02:23 Support stand for longer objects
02:54 TR2 PRO useable on ANY laser engraver
03:53 Outro - Please subscribe and like
▼ If you want to buy me a nice cold drink, please do so:
http://support.3d-printcreator.com
▼ Subscribe to me on YouTube:
http://subscribe.3d-printcreator.com
▼ Find me on Thingiverse:
http://thingiverse.3d-printcreator.com
▼ Follow me on Twitter:
http://twitter.3d-printcreator.com
▼ Or on my website:
https://3d-printcreator.com/
Have any questions for me? Feel free to ask them here or on my other social media accounts.
Keywords for this video:
#rotaryroller #TwoTrees #3d-printcreator
Thanks for watching this video.[+] Show More
▼ Customize your production like a pro with LightBurn and a laser engraver
TwoTrees TS2 Laser with AUTOFOCUS and 10 Watt laser module - ...
TwoTrees TS2 Laser with AUTOFOCUS and 10 Watt laser module - https://s.zbanx.com/r/ccTnxVeyTfur
--- Look for coupons on their homepage ---
Whenever you have to customize your production with lightburn and a laser ...engraver, you will have to create a backboard and multiple objects that you can change easily. In this tutorial you will see how to easily customize your production like a pro with LightBurn and a laser engraver.
This FREE lightburn customized engraving tutorial is my Christmas gift to my followers who have been loyal to my channel and subscribed throughout the years. From the bottom of my heart, Thank You.
00:00 Introduction
00:15 Designing the backboard
03:01 Making a group object
05:00 Locking the backboard to prevent from changing things
06:04 The actual engraving of the backboard
06:34 Creating the artwork design
11:07 Preparing artwork for duplicates
12:33 Customizing the names on every coaster
15:43 Preparing the laser, placing the coasters on the backboard
16:16 Laser engraving the coasters (STRONG LIGHT WARNING)
18:16 Showing the engraved coasters
▼ If you want to buy me a nice cold drink, please do so:
http://support.3d-printcreator.com
▼ Subscribe to me on YouTube:
http://subscribe.3d-printcreator.com
▼ Follow me on Twitter:
http://twitter.3d-printcreator.com
▼ Or on my website:
https://3d-printcreator.com/
Have any questions for me? Feel free to ask them here or on my other social media accounts.
Keywords for this video:
#Lightburn #LightburnTutorials #3dprintcreator
Thanks for watching this video.[+] Show More
▼ Two Trees Totem S Review AND marking a STEEL LETHERMAN knife
Buy your laser engraver here: https://www.twotrees3dofficial.com/collections/engraver/products/two-trees-totems-laser-engraving-machine-lks-motherboard-40w
In this review I test the Two Trees, Totem S laser engraving machine. This laser engraving machine has a laser that has a real power ...of 5.23 WATT and this is combined with a lens that focuses the light to just 0.08mm. Together, this ensures that this laser has extreme power to cut or engrave objects. It is even possible to engrave the hardened steel of a Letherman multitool in super high detail, with this laser machine. I didn't even have to use a tool like mustard, the machine can engrave directly on silver colored hardened steel.
The machine comes as a kit and can be assembled in about an hour by people who can also assemble an IKEA cabinet. I'm using paid software from Lightburn in this review, because I'm licensed and can handle it well, but the laser works with any software that can send GRBL commands.
The laser is available from several vendors, but I prefer the original Two Trees website, and the link used is an affiliate link, which helps recoup my cost of making this video a little bit.
Thanks for watching, and see you in the next video.
▼ If you want to buy me a nice cold drink, please do so:
http://support.3d-printcreator.com
▼ Subscribe to me on YouTube:
http://subscribe.3d-printcreator.com
▼ Find me on Thingiverse:
http://thingiverse.3d-printcreator.com
▼ Follow me on Twitter:
http://twitter.3d-printcreator.com
▼ Or on my website:
https://3d-printcreator.com/
Have any questions for me? Feel free to ask them here or on my other social media accounts.
Keywords for this video:
#TwoTrees #laserengraver #cheaplaser
Thanks for watching this video.[+] Show More
▼ Two Trees Totem S Review AND marking a STEEL LETHERMAN knife
Buy your laser engraver here: ...
Buy your laser engraver here: https://www.twotrees3dofficial.com/collections/engraver/products/two-trees-totems-laser-engraving-machine-lks-motherboard-40w
In this review I test the Two Trees, Totem S laser engraving machine. This laser engraving machine has a laser that has a real power ...of 5.23 WATT and this is combined with a lens that focuses the light to just 0.08mm. Together, this ensures that this laser has extreme power to cut or engrave objects. It is even possible to engrave the hardened steel of a Letherman multitool in super high detail, with this laser machine. I didn't even have to use a tool like mustard, the machine can engrave directly on silver colored hardened steel.
The machine comes as a kit and can be assembled in about an hour by people who can also assemble an IKEA cabinet. I'm using paid software from Lightburn in this review, because I'm licensed and can handle it well, but the laser works with any software that can send GRBL commands.
The laser is available from several vendors, but I prefer the original Two Trees website, and the link used is an affiliate link, which helps recoup my cost of making this video a little bit.
Thanks for watching, and see you in the next video.
▼ If you want to buy me a nice cold drink, please do so:
http://support.3d-printcreator.com
▼ Subscribe to me on YouTube:
http://subscribe.3d-printcreator.com
▼ Find me on Thingiverse:
http://thingiverse.3d-printcreator.com
▼ Follow me on Twitter:
http://twitter.3d-printcreator.com
▼ Or on my website:
https://3d-printcreator.com/
Have any questions for me? Feel free to ask them here or on my other social media accounts.
Keywords for this video:
#TwoTrees #laserengraver #cheaplaser
Thanks for watching this video.[+] Show More
▼ Cutting Fabrics with a Laser Cutter / Engraver | Two Trees Totem S
Buy your laser engraver here: ...
▼ Laser Engraving Tips - Using a Sandbox
If you want to engrave objects with a laser engraver and those objects ...
If you want to engrave objects with a laser engraver and those objects are not completely flat on the bottom, you may have problems leveling your laser with respect to ...your object because it cannot lie flat on the table below your laser.
A handy way to easily level your object with respect to your laser is to push the object into sand, rice or cat litter so that the unevenness of the object is negated.
You can easily make a sandbox yourself, or you can use a baking tin for the oven that you fill with sand or another material of your choice.
P.S.: Share this tip with others. thanks...
▼ If you want to buy me a nice cold drink, please do so:
http://support.3d-printcreator.com
▼ Subscribe to me on YouTube:
http://subscribe.3d-printcreator.com
▼ Find me on Thingiverse:
http://thingiverse.3d-printcreator.com
▼ Follow me on Twitter:
http://twitter.3d-printcreator.com
▼ Or on my website:
https://3d-printcreator.com/
Have any questions for me? Feel free to ask them here or on my other social media accounts.
Keywords for this video:
#3Dprinter #3Dprinting #XYZPrinting #3Dprintcreator
Thanks for watching this video.[+] Show More
▼ Creating gifts in Lightburn
Laser Engraver: Ortur Laser Master 2 Pro: ...
▼ TwoTrees TR2 Pro Rotary Roller
The product shown is the TwoTrees TR2 Pro Rotary Roller Affiliate ...
The product shown is the TwoTrees TR2 Pro Rotary Roller
Affiliate link: https://gozbx.com/r/pxgpjHgt00wz Thanks for using this link, it helps the channel
Or... Win a TwoTrees Product here: https://gleam.io/5nIgC/christmas-wish-list
The TwoTrees TR2 Rotary ...Roller is not only a roller for engraving round objects, like mugs or flasks, but it has all the tools for you to also engrave on rings, balls, long objects like pipes or bottles, objects that are not round, and not useable on normal rotary rollers, etc.
This Rotary Roller is by far the most versatile tool I have ever seen for my laser engraver, and you can use it not only on TwoTrees lasers, but also on any other laser engraver that uses a stepper motor for the Y axis (as far as I know, all of them). The needed cables for the different types and brands of lasers are included in the box.
- The TwoTrees Y axis Rotary Roller, for ANY laser engraver: https://gozbx.com/r/pxgpjHgt00wz
- The TS2 Laser engraver I used: https://s.zbanx.com/r/FkciObY0ffnP
- Air Assist unit for ANY TwoTrees Laser (and many other brands) https://s.zbanx.com/r/gsmzZCGIodjL
00:00 Introduction
00:16 TR2 PRO a very special rotary roller
00:34 Chuck for engraving balls and much more
00:51 Engrave jewelry, like rings
01:08 Replacable claws in the Chuck are included
02:23 Support stand for longer objects
02:54 TR2 PRO useable on ANY laser engraver
03:53 Outro - Please subscribe and like
▼ If you want to buy me a nice cold drink, please do so:
http://support.3d-printcreator.com
▼ Subscribe to me on YouTube:
http://subscribe.3d-printcreator.com
▼ Find me on Thingiverse:
http://thingiverse.3d-printcreator.com
▼ Follow me on Twitter:
http://twitter.3d-printcreator.com
▼ Or on my website:
https://3d-printcreator.com/
Have any questions for me? Feel free to ask them here or on my other social media accounts.
Keywords for this video:
#rotaryroller #TwoTrees #3d-printcreator
Thanks for watching this video.[+] Show More
▼ Customize your production like a pro with LightBurn and a laser engraver
TwoTrees TS2 Laser with AUTOFOCUS and 10 Watt laser module - ...
TwoTrees TS2 Laser with AUTOFOCUS and 10 Watt laser module - https://s.zbanx.com/r/ccTnxVeyTfur
--- Look for coupons on their homepage ---
Whenever you have to customize your production with lightburn and a laser ...engraver, you will have to create a backboard and multiple objects that you can change easily. In this tutorial you will see how to easily customize your production like a pro with LightBurn and a laser engraver.
This FREE lightburn customized engraving tutorial is my Christmas gift to my followers who have been loyal to my channel and subscribed throughout the years. From the bottom of my heart, Thank You.
00:00 Introduction
00:15 Designing the backboard
03:01 Making a group object
05:00 Locking the backboard to prevent from changing things
06:04 The actual engraving of the backboard
06:34 Creating the artwork design
11:07 Preparing artwork for duplicates
12:33 Customizing the names on every coaster
15:43 Preparing the laser, placing the coasters on the backboard
16:16 Laser engraving the coasters (STRONG LIGHT WARNING)
18:16 Showing the engraved coasters
▼ If you want to buy me a nice cold drink, please do so:
http://support.3d-printcreator.com
▼ Subscribe to me on YouTube:
http://subscribe.3d-printcreator.com
▼ Follow me on Twitter:
http://twitter.3d-printcreator.com
▼ Or on my website:
https://3d-printcreator.com/
Have any questions for me? Feel free to ask them here or on my other social media accounts.
Keywords for this video:
#Lightburn #LightburnTutorials #3dprintcreator
Thanks for watching this video.[+] Show More
